Categories
The 3lb fire hydrant is a portable fire extinguishing device designed to be used with a 3lb water tank.
The unit is easy to use and is designed to work with any type of hydrant, including those that use an air pressure regulator.
Here are the steps to getting your 3lb Hydrant ready for a fire.1.
Put the hydrant in a sealed container, which is a good idea if you plan to use it for a long time.2.
Fill the hydration reservoir with water and set the valve to 3.5 psi (pressure gauge).3.
The 3.0 psi valve should release the water in the reservoir at a steady rate, which can take anywhere from 5 to 30 seconds.4.
The valve should turn off when you release the valve, so that you don’t get any water in your lungs.5.
The hose should be tightly sealed so that water can’t escape and the hose should run through the vent holes of the container.6.
The container should be completely dry.7.
Place the hydant on a rack in the refrigerator and allow it to sit for at least 3 hours before it’s ready to use.8.
After 3 hours, you can test it out.
The unit will give you a 3.75-inch hose.
The 3lb hydrant also comes with an adjustable hose nozzle, so you can adjust it to your specific needs.
The device also comes in two sizes: a 3-liter bottle and a 3,200-ml bottle.
Here’s how to use the 3.2-liter Hydrant.1 to 3: Use the nozzle on the lower end of the nozzle, which will allow the hose to extend out.4 to 6: Press the valve down and then release the nozzle.7 to 9: Push the valve back up and hold the nozzle in place until the water level falls to 1.5 feet.10 to 13: Hold the nozzle at the top of the bottle and let it drop for 10 seconds before releasing it.14 to 17: Press down and release the button.18 to 20: Press and hold down the button until the nozzle is at the bottom of the water bottle.21 to 25: Pull the valve up, release it and then pull the nozzle down.
The hose is rated for 2,000 pounds of pressure, so it’s capable of holding a gallon of water.
This will help you to control the amount of water you’re breathing.
The hydrant’s nozzle also has an indicator light that shows when it’s fully inflated.
The device is not waterproof, so the bottle can be easily lost in the rain.
To keep your hydrant safe, store it in a safe place like the freezer.
If you have questions about buying a 3 lb water hydrant or a 3L water bottle, check out our FAQs.
